List Your Arcade Collections Here

[Arasoi]

Oh snaps. *goes to check*

[TheDomesticInstitution]

Currently: A Donkey Kong Cocktail, and a work-in-progress Super Pac-Man reconversion multi. The Super Pac-Man used to be black and was converted to a 1943.

Here's a thread about the whole restoration over at KLOV.

Here's the Flickr Photo Set Dedicated to the very tedious process.

[DreamTR]

I finally went through my stuff so here are my machines (not including 150 or so arcade PCBS in addition to these...

Cyberball 2072
Truxton (Tatsujin)
Guilty Gear Accent Core
Street Fighter III: Third Strike (33 inch deluxe)
Maximum Force (33 inch dedicated deluxe)
Area 51: Site 4
Batman Forever
Vs Ice Climber
Street Fighter EX 2 Plus (Blue Q-Sound Cabinet)
Cabal
Capcom VS SNK 2
NFL Blitz 2000 Gold/NBA Showtime
Tekken Tag Tournament
Marvel VS. Capcom
Marvel VS Capcom 2 (shared cabinet)
Soul Calibur III
Mortal Kombat 4
Cruis'n World 39 inch dedicated
Cruis'n World 39 inch dedicated
Solar Assault
Killer Instinct
Capcom Fighting Jame
Mortal Kombat II
Bad Dudes
Super Street Fighter II Turbo
Monkey Ball
Michael Jackson's Moonwalker
Cadillacs and Dinosaurs
JAMMA 27 inch cabinet (in repair)

Pinballs
Taxi
Bad Cats
Phantom of the Opera
Fun House
Stargate
Pinbot
Back to the Future
The Sopranos
The Simpsons (1989 Data East)
Theatre of Magic
Checkpoint
Police Force
Elvira Scared Stiff

Thunder Force AC (Crown Candy Cabinet)
Snow Bros (Astro City)
House of the Dead 2
Mr. Do!
Akatsuki Blitzkompf (New Astro City)
King of Fighters Neowave (Namco Excelleena)
BEatmania COmplete Mix
Blazblue (OK BABY Taiwanese Candy)
Street FIghter IV (dedicated VEWLIX modified for 2 player XBOX 360)
Ninja Warriors (dedicated 3 screen version)
Hyper Sports
Popeye
Arkanoid
Neo Geo 4 Slot
Neo Geo 4 Slot Candy
VS Castlevania
VS Duck Hunt
Playchoice 10 Single Monitor Version
Nintendo SUper System
PlayChoice 10 Double Monitor Version
VS Slalom
Indiana Jones and The Temple of Doom
Raiden DX (OK Baby Taiwanese Candy)
Defender
VS Super Mario Bros
Red Tent (VS Super Mario/VS Excitebike)
Red Tent (VS Pinball/VS Tetris)
Spider-Man
Punisher
Viper Phase 1
Galaxian
Elevator Action
Burger Time
Pac-Man Plus
Time Pilot 84
Double Dragon
Track and Field
Ninja Gaiden
Sunset Riders
Run N Gun 2 (going to laundromat)
empty 6 button SF cabinet (going to laundromat)

Rolling Thunder
Guardians of the Hood
Capcom Bowling
Street FIghter III: 2nd Impact
Dig Dug
Super Street Fighter II Turbo (dedicated Q Sound)
SVC Chaos
Neo Geo 1 Slot (Bust A Move)
Cruisn' World
Cruisn" World
Virtua Fighter
Tekken 5 Dark Resurrection
Aero Fighters
Virtua Cop 2
World Series Baseball 99
Ultimate Mortal Kombat 3
Guerrila War
Magic Sword
The Simpsons
Lethal Enforcers


More Pinball:

Takes of the Arabian Nights
Demolition Man
Teenage Mutant Ninja Turtles
The Shadow
Star Trek The Next Generation
Twilight Zone

Dragon's Lair
Inter Stellar (cockpit)
MACH 3
Mario Bros
Gauntlet Dark Legacy (never on location)
Jammatized Nintendo cabinet (to be changed)
Capcom MINI CUTE
Ghosts N GOBLINS


Guns n’ Roses Pinball

Black Knight 2000 Pinball

Elvira and the Party Monsters Pinball

Black Rose Pinball

Time Machine Pinball

Bride of Pinbot Pinball

Carnevil

Marvel Vs. Capcom 2 (cabinet swap)

Holosseum

Laser Ghost

Zombie Raid

Food Fight

Gyruss

Tron

Playchoice 10 Dual Monitor

Donkey Kong JR.

Galaga

Ms. Pacman

San Francisco Rush

San Francisco Rush

San Francisco Rush

Time Pilot

Raiden II

Champion Baseball

Turbo Out Run

Strikers 1945 III

X-men vs. Street Fighter

Police Trainer

Ranger Mission

House of the Dead

Point Blank 2

Blitz ‘99

Neo Geo 2 Slot

Alien Vs. Predator

Double Dragon II

POW

Gauntlet Legends

Ikari Warriors

Spy Hunter (repair, power to monitor)

Baby Pac-Man (repair)

Jungle hunt (rejuvenator)

Silk Worm (being converted)

X-Files Pinball (in repair)

Road Show Pinball (resetting)

Judge Dredd Pinball (display/flipper)

NARC (rejuvenator/chassis)

Donkey Kong 3 (connector/monitor)

Earthshaker Pinball

Star Trek Pinball

Baby Pac-Man (needs repair)

Xybots (control panel replacement)

Tetris (flyback)

Splatterhouse

Tutankham (needs repair)

Donkey Kong (being converted)

[Arasoi]

Here is a Game Paradise: Master of Shooting pcb I just got, Jaleco's response to Konami's Parodius series:







Great/crazy levels and bosses, and you can play as Formation Z. Import only pcb to my knowledge, but English language is selectable with a dipswitch. Good times.

Looks a lot nicer now that I have 75 ohm resistors on the RGB lines in my supergun..

[tomwaits]

My current arcade collection:
Capcom dynamo 25" cab - ok condition, still working on it
Millipede cab - needs a LOT of work
Vogatek Mk. 3 supergun

PCBs:
jrok Williams 8-in-1
MV-1 (unibios & mem card reader - Virtual AES), MV-1C
(several MVS carts and a 100-in-1 multi)
Hyper NeoGeo64 fighting version w/3 games
X-men (Konami)
Mortal Kombat 1
Mortal Kombat 2
Primal Rage
Bubble Bobble
Taito Renegade (some garbled graphics/sound)
MGCD Dreamcast -> JAMMA adapter

[Arasoi]

That's a nice haul of PCBs there Tom. What version of Xmen did you get? 2/4/6 player.

Do the Mortal Kombat PCBs require -5v?

[tomwaits]

That's a nice haul of PCBs there Tom. What version of Xmen did you get? 2/4/6 player.

Do the Mortal Kombat PCBs require -5v?

My X-men is 2P, but it has the connectors on the PCB to wire up two more controllers. There are 3 socketed EPROMs so I'm assuming it could be converted to 4P just by swapping EPROMs? Haven't looked into it yet. I know the 6P is a completely different PCB and I think you actually need two 6P PCBs linked because 6P X-men was split across two screens.

I've got -5v wired on the JAMMA connector. I don't know if the MKs require it, but it's there. The only extra connections on the MKs are for the HP/HK harnesses.


EDIT: Got some Konami X-men help from hobbyroms.com. I bought 2 eproms from them to swap my X-men to 4P mode. After swapping the eproms it gives a rom 13b failure during the startup test. To finish the swap, you have to hold down the service button during a cold boot or reset. 13b is the eeprom configuration memory and it needs to be re-initialized after swapping eproms. Unfortunately, the 4P roms don't have a freeplay option like the 2P roms.

[IronBuddha]

Currently: A Donkey Kong Cocktail, and a work-in-progress Super Pac-Man reconversion multi. The Super Pac-Man used to be black and was converted to a 1943.

Here's a thread about the whole restoration over at KLOV.

Here's the Flickr Photo Set Dedicated to the very tedious process.

Whoa so you're the one that restored that super pacman cab! I just read up on that project while I was going through old posts at KLOV. You've done an excellent job on that!

I have a Super Pacman cab as well, it's completely gutted. I want to do the same exact thing, putting in a multi-board. The side art and kick panel art is still there, it's aged I guess is the way to put it. It has a "grainy" look and feel, I need to post some pictures to explain what I'm talking about. It's good enough for me, but seeing yours and reading up you did that without stencils, once again all I can say is great job!

[BenG76]

Got a Donkey Kong, Donkey Kong Jr. and a Time Pilot. I would like to get a Galaga sometime and the wife wants a Ms Pac-Man. I may have to find one with both in it to save space.

[diskoboy]

My Super Mario Bros. machine has left the building.

A Williams Taxi pinball machine has taken it's place. And in one day, it's gotten more attention than my other 2 games, combined, have in the past year.

[drunkninja]

I have a Sega Astro City cabinet and the following PCBs:

Empire City 1931
Trigon (aka Lightning Fighters)
DoDonPachi

I also have an adapter that allows me to hook my consoles to the cabinet. Works great for PS2/360 shmups this way.

[benjam138]

Champion Baseball
Pac-Man with 96 in 1
Rastan (converted from a Ghouls N Ghost cab)
Street Fighter II (w/ Champion Edition inside)

PCBs:
Black Tiger
Double Dragon
High Impact
Irem Skins Game
NBA Jam
Pit-Fighter
Robocop
Soul Blade
WWF Superstars

[TheDomesticInstitution]

Whoa so you're the one that restored that super pacman cab! I just read up on that project while I was going through old posts at KLOV. You've done an excellent job on that!

I have a Super Pacman cab as well, it's completely gutted. I want to do the same exact thing, putting in a multi-board. The side art and kick panel art is still there, it's aged I guess is the way to put it. It has a "grainy" look and feel, I need to post some pictures to explain what I'm talking about. It's good enough for me, but seeing yours and reading up you did that without stencils, once again all I can say is great job!

Thanks for the kind words. I missed this post by a few months- sorry. The paint job isn't 100% perfect, but it's about as good as this sort of project can get. The countless hours I spent taping, painting, re-taping, were labor intensive and not something I'd do again. About the last thing I need for it is the bezel. They're about 65-100 bucks, so it's not high on my priority list. I'm pretty proud of the CPO I made for it. Anyway I enjoy playing it and I put plenty of labor and sweat into it, getting it where it's at. I'd like a new monitor, but the one in there has all new caps and a flyback so it's hard to justify the cost when this one should last for many many years yet.

[vgc]

My current arcade games, maybe 50% working properly : (

Galaga
GORF
Gyruss
Hang-On mini
Hat Trick CT
Joust
Liberator
Mad Planets
*Megatouch Maxx Sapphire UR & bartop
Millipede
Mr. Do
Mr. Do's Castle
Ms. Pac-Man
*Neo Geo MVS 2 & 4 slot
Nintendo Super System
Out Run
Pac-Man
*PlayChoice 10
Pleiades
Super Hang-On
Tron
Vectrex mini-cade
Wizard Of Wor
WWF Royal Rumble

*can be played at my store in Cleveland, Ohio