Monitor coil replacement

[cyberfluxor]

This may be more suitable here than the arcade sub-forum. I also posted this at the Neo-Geo forums, but since I have a friend comming over next weekend to help I need to order a replacement ASAP. Any fast assistance is appreciated.

I need to replace a horizontal coil for an arcade monitor.

I downloaded the monitor manual from Mike's Arcade and should be helpful down the road.
Here are the pictures of the coil:


I've been digging through the couple of coils at:
http://www.therealbobroberts.net/parts.html
I'm not sure what one I need, but the monitor is a Wells-Gardner 13K4713. Any direction as to which one would be greatful. Also any alternative sellers or if someone here has some would be appreciated. If any additional information is needed just let me know.

Thanks in advanced!

- Matt

[cyberfluxor]

It appears I'm working everything out with Bob and should be getting what I need to fix this baby up over the next week.

Apparently the 4700 series has the same coil as the 4600, which does not have replacement parts "off the shelf," so they must be taken from another monitor or retrofit the coil that goes on a WG 7000 series monitor. Looks like I'll be doing the later of the two options.